Skip to content Skip to sidebar Skip to footer

How To Test Point Xiaomi Redmi Note 5A

How To Test Point Xiaomi Redmi Note 5A

Test point Xiaomi Redmi Note 5A - One smartphone from Xiaomi that is quite interesting and has quite good features is the Xiaomi Redmi Note 5A.

For specifications of Xiaomi Redmi Note 5A you can see in the list below:

Screen: 5.5-inch HD display with Corning Gorilla Glass
Chipset: Qualcomm Snapdragon 425 quad-core 1.4GHz processor Max
RAM: 2 gigabytes
Memory: 16 gigabytes
SIM Card: Dual card, dual standby + microSD card slot up to 128 gigabyte
Battery : 3080mAh
Camera : 5 megapixel f/2.0 (front), 13 megapixel f/2.2 PDAF (rear)
Weight: 150 gram
Color variant: Dark Gray, Gold, and Rose Gold

Pros of Redmi Note 5A

1. Hardware Specifications

This smartphone is equipped with a Qualcomm Snapdragon 425 Octa-core chipset, 2 GB of RAM, and 16 GB of internal storage that can be added with a microSD. With an affordable price, this hardware specification is attractive.  

2. 5.5 inch HD screen

This smartphone screen has a width of 5.5 inches with HD resolution (1,280 x 720 pixels) and IPS technology. The presence of IPS technology, allows users to be able to quickly unlock smartphones.

3. 13 MP camera

This smartphone has been equipped with a camera that has a resolution of 13 MP with an aperture of f/2.2, PDAF, and LED Flash that can produce good photos. While the front camera has a resolution of 5 MP which is quite good for taking selfie photos.


Disadvantages of Redmi Note 5A

1. Does not support fast charging

Although the battery has a capacity of 3080 mAh, this smartphone is not yet equipped with a fast-charging feature so that if a gadget is charging the battery it will automatically take 2 hours to 2.5 hours.

2. Battery Non-removable

Following current trends, the Xiaomi Redmi Note 5A has been equipped with a non-removable battery so that if there is damage or an error, you must replace it at the official Service Center.

3. No fingerprint

As a smartphone today, the Redmi Note 5A is not equipped with a fingerprint sensor even though this very feature is arguably quite important for now because it can make it easier for users to quickly unlock smartphones.


After knowing the short specifications of the Xiaomi Redmi Note 5A, then it is time for us to enter into a discussion on how to do a test point EDL mode on the Xiaomi Redmi Note 5A smartphone.

The test point method is done if you want to reinstall the Xiaomi smartphone that has problems with its software system.

Because the damage to the software could be caused by excessive use of mobile phones, or too many install applications that make the system on the phone into a crash or error.

Surely if this happens it could cause some symptoms of damage to the Xiaomi Redmi Note 5A Android smartphone as follows:

  • The phone becomes a boot loop
  • Restart continuously
  • Total off or hard brick

If one of the damage problems occurs on your Xiaomi Redmi Note 5A phone then it is necessary to repair it by reinstalling it.

In addition to the EDL mode method, you can still flash through test points on Xiaomi Redmi Note 5A phones. and by doing a test point Xiaomi Redmi Note 5A does not have to unlock the bootloader first.

Here are some steps to test point Xiaomi Redmi Note 5A

  • To determine the location of the pin test point on the smartphone android Xiaomi Redmi Note 5A must certainly open the back cover on the back of the phone.
  • Use a special screwdriver to remove the bolts attached to the Xiaomi phone's mainboard.
  • Use tweezers or a jumper cable to connect the test point pin on the Xiaomi Redmi Note 5A phone.
  • Use a well-conditioned data cable to connect your phone to a PC or laptop computer.
  • Flashing using Mi flash tools and also stock ROM or firmware that suits the type and type of mobile phone you have.

Below is a diagram image to determine the location of the Xiaomi Redmi Note 5A test point pin. be sure to disassembly the phone part carefully. To be insulted from the growing damage.
How To Test Point EDL mode Xiaomi Redmi Note 5A

How To Test Point EDL Download Mode Xiaomi Redmi Note 5A

Such is the information and how to determine the location of the pin test point EDL download mode Xiaomi Redmi Note 5A. this way can be a solution if your Xiaomi phone wants to flash or upgrade the firmware without having to unlock the bootloader. Thank you.

Post a Comment for "How To Test Point Xiaomi Redmi Note 5A"