Skip to content Skip to sidebar Skip to footer

How To Test Point Xiaomi Mi A2 Android Smartphone

 How To Test Point Xiaomi Mi A2 Android Smartphone

Test point Xiaomi Mi A2 - One smartphone from Xiaomi that is quite interesting and has quite good features is the Xiaomi Mi A2.

For specifications of Xiaomi Mi A2 you can see in the list below:


  • 5.99 inch LTPS IPS LCD screen, Qualcomm SDM660 Snapdragon 660 Chipset, Octa-core, Adreno 512.
  • 64 GB/128 GB internal memory, up to 256 GB microSD,
  • 4 GB/6 GB RAM.
  • Dual rear camera 12 MP + 20 MP LED flash, front camera 20 MP,
  • 3000 mAh battery,
  • 4G LTE internet support network.

Advantages of Xiaomi Mi A2(6X) Android smartphone: It is equipped with a fingerprint sensor, a fast charge feature so that it speeds up the battery charging process, CPU performance is quite good and the graphic display on the LCD screen is quite sharp.

Disadvantages: The MicroSD slot is still integrated with SIM 2 or still uses a hybrid sim card slot.

After knowing the short specifications of Xiaomi Mi A2, then it is time for us to enter into a discussion on how to do a test point on the Xiaomi Mi A2(6X) smartphone.

The test point method is done if you want to reinstall the Xiaomi smartphone that has problems with its software system.

Because the damage to the software could be caused by excessive use of mobile phones, or too many install applications that make the system on the phone into a crash or error.

Surely if this happens it could cause some symptoms of damage to the Xiaomi mi a2 android smartphone as follows:

  • The phone becomes boot loop
  • Restart continuously
  • Total off or hard brick

If one of the damage problems occurs on your Xiaomi Mi A2 phone then it is necessary to repair it by reinstalling it.

In addition to the EDL mode method, you can still flash through test points on Xiaomi Mi A2 phones. and by doing a test point Xiaomi Mi A2(6X) does not have to unlock the bootloader first.

Here are some steps to test point Xiaomi Mi A2

  • To determine the location of the pin test point on the smartphone Xiaomi Mi A2 must certainly open the back cover on the back of the phone.
  • Use a special screwdriver to remove the bolts attached to the Xiaomi phone's mainboard.
  • Use tweezers or jumper cable to connect the test point pin on the Xiaomi Mi A2 phone.
  • Use a well-conditioned data cable to connect your phone to a PC or laptop computer.
  • Flashing using Mi flash tools and also stock ROM or firmware that suits the type and type of mobile phone you have.

Below is a diagram image to determine the location of the Xiaomi mi a2 test point pin. be sure to disassembly the phone part carefully. To be insulted from the growing damage.

How To Test Point Xiaomi Mi A2

Such is the information and how to determine the location of the pin test point Xiaomi Mi A2. this way can be a solution if your Xiaomi phone wants to flash or upgrade the firmware without having to unlock the bootloader. Thank you.

Post a Comment for "How To Test Point Xiaomi Mi A2 Android Smartphone"